Printing Press 50 x 90cm, geared and driven table

Printing Press for relief and gravure printing like Lino,

woodcuts, erasures etc.. For an easy movement of the printing plate by turning the crosslike handle the lower roller has two cogs which are moved by a gear reduction with a ratio of 2.2:1.The same cogs drive the printing plate over two on each side mounted tooth racks. This reduces your hand-power to nearly a third.

With two star-shaped handles the pressure of the upper roll can be adjusted smoothly. On the pressure-stable Multiplex Plate the print is put. With a pre-setting thus many continous printings can be done. Been suitable for sizes up to DIN A2.

 

Technical information:

- Printing Press, Upper Roll / Lower Roll Ø 80mm

- width 500 mm,

- length of printing table 900 mm,

- Gearbox, ratio 2.2:1 on lower roll with cross-like handle,

- Guided printing plate driven by cogs and tooth racks

- adjustable pressure directly to Upper Roll up to 1000 kg

- passage Upper/Lower roll 21 mm ( on special request up to 43 mm),

- Printing plate Multiplex with 2,5mm galvanized metal sheet mounted on plywood, 19 mm thick,

- Printing felt 490x900 mm, 5 mm thick incl.

- Weight: 39,3 kg

 

Barcode EAN 13:

4022505 172804